if you notice low signal strength or you lose your connection in some parts of your home , that's probably will cause slow internet navigation and connection dropping .

If you're looking for Boosting Signal For Wireless Router , these tips will help you to improve router signal.

Boosting Signal For Wireless Router:

• Reposition your Router:
  try to place your wireless router in a central location in your home as raised up as possible and away from any metal stuff ,
  if possible,think in a location near the window to give clear line of sight and increase the wireless range .
• Check for interference:
  many cordless phones, microwave ovens etc.. use the same router frequency .
  make sure to Avoid wireless electronics that use the 2.4GHz frequency ( or 5Ghz if you use a Dual-Band router)
• Replace your router's Antenna:
  
  

  Most routers come with an omni-directional antenna which broadcasts and receives in all directions with equal efficiency.If your router is near an outside wall, half of the wireless signals will be sent outside your home, and much of your router's power will be wasted.
  If you upgrade to a hi-gain directional antenna that focuses the wireless signals in only one direction, you can maximize the efficiency of the system by aiming the signal in the direction you need it.
  to boost wireless signal ,you can also replace the broadcast antenna on your router with a model that delivers more power.




• Change your wireless channel:
  Routers can broadcast on a series of channels, between one and eleven.
  Change to a channel that will allow your router a clear signal between other wireless networks .
  you can change the channel easily through the router configuration web interface
• Add a wireless repeater:
  Wireless repeaters (or access points) extend your wireless network's range with no need to install additional wiring.
  Purchase and attach a wireless amplifier, also known as a booster, directly to your router.
  A booster can be more affordable than a repeater as they only increase the strength of your existing signal, rather than the strength and range.
• Upgrade 802.11G devices to 802.11N :
  
  

  The latest IEEE standard in the Wi-Fi category is 802.11n: designed to improve on 802.11g in the amount of bandwidth supported by utilizing multiple wireless signals and antennas (called MIMO technology) instead of one.
  MIMO(Multiple Input, Multiple Output) offers significant increases in data throughput and link range without additional transmit power ,802.11n wireless routers deliver stronger performance, coverage than G routers .
  this is for sure the best method to Boost Signal For a Wireless Router , unfortunately, not free